Microenzymes: Is There Anybody Out There?

Biological macromolecules are found in different shapes and sizes. Among these, enzymes catalyze biochemical reactions and are essential in all organisms, but is there a limit size for them to function properly? Large enzymes such as catalases have hundreds of kDa and are formed by multiple subunits, whereas most enzymes are smaller, with molecular weights of 20-60 kDa. Enzymes smaller than 10 kDa could be called microenzymes and the present literature review brings together evidence of their occurrence in nature. Additionally, bioactive peptides could be a natural source for novel microenzymes hidden in larger peptides and molecular downsizing could be useful to engineer artificial enzymes with low molecular weight improving their stability and heterologous expression. An integrative approach is crucial to discover and determine the amino acid sequences of novel microenzymes, together with their genomic identification and their biochemical biological and evolutionary functions.

Mapping secondary substrate-binding sites on the GH11 xylanase from Bacillus subtilis.

Xylanases are of significant interest for biomass conversion technologies. Here, we investigated the allosteric regulation of xylan hydrolysis by the Bacillus subtilis GH11 endoxylanase. Molecular dynamics simulations (MDS) in the presence of xylobiose identified binding to the active site and two potential secondary binding sites (SBS) around surface residues Asn54 and Asn151. Arabinoxylan titration experiments with single cysteine mutants N54C and N151C labeled with the thiol-reactive fluorophore acrylodan or the ESR spin-label MTSSL validated the MDS results. Ligand binding at the SBS around Asn54 confirms previous reports, and analysis of the second SBS around N151C discovered in the present study includes residues Val98/Ala192/Ser155/His156. Understanding the regulation of xylanases contributes to efforts for industrial decarbonization and to establishing a sustainable energy matrix.

Biocatalytic potential of Pseudolycoriella CAZymes (Sciaroidea, Diptera) in degrading plant and fungal cell wall polysaccharides.

Soil biota has a crucial impact on soil ecology, global climate changes, and effective crop management and studying the diverse ecological roles of dipteran larvae deepens the understanding of soil food webs. A multi-omics study of Pseudolycoriella hygida comb. nov. (Diptera: Sciaroidea: Sciaridae) aimed to characterize carbohydrate-active enzymes (CAZymes) for litter degradation in this species. Manual curation of 17,881 predicted proteins in the Psl. hygida genome identified 137 secreted CAZymes, of which 33 are present in the saliva proteome, and broadly confirmed by saliva CAZyme catalytic profiling against plant cell wall polysaccharides and pNP-glycosyl substrates. Comparisons with two other sciarid species and the outgroup Lucilia cuprina (Diptera: Calliphoridae) identified 42 CAZyme families defining a sciarid CAZyme profile. The litter-degrading potential of sciarids corroborates their significant role as decomposers, yields insights to the evolution of insect feeding habits, and highlights the importance of insects as a source of biotechnologically relevant enzymes.

Xylose isomerase from Piromyces sp. E2 is a promiscuous enzyme with epimerase activity.

Xylose isomerase catalyzes the isomerization of D-xylose to D-xylulose with promiscuous activity for other saccharides including D-glucose, D-allose, and L-arabinose. The xylose isomerase from the fungus Piromyces sp. E2 (PirE2_XI) is used to engineer xylose usage by the fermenting yeast Saccharomyces cerevisiae, but its biochemical characterization is poorly understood with divergent catalytic parameters reported. We have measured the kinetic parameters of the PirE2_XI and analyzed its thermostability and pH-dependence towards different substrates. The PirE2_XI shows promiscuous activity towards D-xylose, D-glucose, D-ribose and L-arabinose with variable effects depending on different divalent ions and epimerizes D-xylose at C3 to produce D-ribulose in a substrate/product dependent ratio. The enzyme follows Michaelis-Menten kinetics for the substrates used and although KM values for D-xylose are comparable at 30 and 60 °C, the kcat/KM is three-fold greater at 60 °C. The purified PirE2_XI shows maximal activity at 65 °C in the pH range of 6.5-7.5 and is a thermostable enzyme, maintaining full activity over 48 h at 30 °C or 12 h at 60 °C. This is the first report demonstrating epimerase activity of the PirE2_XI and its ability to isomerize D-ribose and L-arabinose, and provides a comprehensive in vitro study of substrate specificity, effect of metal ions and temperature on enzyme activity and these findings advance the knowledge of the mechanism of action of this enzyme.

Glycomic profiling identifies key-structural differences in three arabinoxylan fractions from sugarcane culms.

Sugarcane is an important food and bioenergy crop, and although the residual biomass is potentially available for biorefinery and biofuels production the complex plant cell wall matrix requires pretreatment prior to enzymatic hydrolysis. Arabinoxylans require multiple enzymes for xylose backbone and saccharide side-branch hydrolysis to release xylooligosaccharides and pentoses. The effect of arabinoxylan structure on xylooligosaccharide release by combinations of up to five xylanolytic enzymes was studied using three arabinoxylan fractions extracted from sugarcane culms by sodium chlorite, DMSO and alkaline treatments. Reducing sugar release and LC-MS detection with chemometric analysis identified different xylooligosaccharide profiles between extracts following enzyme treatments. The position and degree of side-branch decorations are determinants of enzyme activity and xylooligosaccharide diversity with the alkaline and post­sodium chlorite extracts as the most accessible and most recalcitrant, respectively, indicating acetyl substituents as a major recalcitrance factor. The complex xylooligosaccharide profile with the DMSO extract suggests regions with different levels of branching. Chemometric analysis identified GH10 xylanase hydrolysis products that act as substrates for other enzymes, such as α-glucuronidase. The strategy reported here can identify specific enzyme combinations to overcome barriers for biomass processing such as pretreatment selection, recalcitrance to enzyme digestion and optimization of reducing sugar release.

The Glycoside Hydrolase Family 35 ß-galactosidase from Trichoderma reesei debranches xyloglucan oligosaccharides from tamarind and jatobá.

Trichoderma reesei (anamorph Hypocrea jecorina) produces an extracellular beta-galactosidase from Glycoside Hydrolase Family 35 (TrBga1). Hydrolysis of xyloglucan oligosaccharides (XGOs) by TrBga1 has been studied by hydrolysis profile analysis of both tamarind (Tamarindus indica) and jatobá (Hymenaea courbaril) seed storage xyloglucans using PACE and MALDI-ToF-MS for separation, quantification and identification of the hydrolysis products. The TrBga1 substrate preference for galactosylated oligosaccharides from both the XXXG- and XXXXG-series of jatobá xyloglucan showed that the doubly galactosylated oligosaccharides were the first to be hydrolyzed. Furthermore, the TrBga1 showed more efficient hydrolysis against non-reducing end dexylosylated oligosaccharides (GLXG/GXLG and GLLG). This preference may play a key role in xyloglucan degradation, since galactosyl removal alleviates steric hindrance for other enzymes in the xyloglucanolytic complex resulting in complete xyloglucan mobilization. Indeed, mixtures of TrBga1 with the α-xylosidase from Escherichia coli (YicI), which shows a preference towards non-galactosylated xyloglucan oligosaccharides, reveals efficient depolymerization when either enzyme is applied first. This understanding of the synergistic depolymerization contributes to the knowledge of plant cell wall structure, and reveals possible evolutionary mechanisms directing the preferences of debranching enzymes acting on xyloglucan oligosaccharides.

Selective xyloglucan oligosaccharide hydrolysis by a GH31 α-xylosidase from Escherichia coli.

Xyloglucan is ubiquitous in the cell walls of land plants and is also an essential storage polymer in seeds of many species. We studied the hydrolysis of the non-reducing end xylosyl residue of xyloglucan oligosaccharides (XGOs) by the Escherichia coli α-xylosidase (YicI). Electrospray Ionization Tandem Mass Spectrometry (ESI-MS/MS) and ion fragmentation analysis together with high performance anion exchange chromatography with pulsed amperometric detection revealed that YicI preferentially removes the xylosyl residue from the glycosyl residue of non-galactosylated oligosaccharides. The YicI shows decreasing activity against the galactosylated oligosaccharides XXXG>XXLG≥XLXG. Studies of the XGOs interaction with active site residues by molecular dynamics simulations suggested that hydrogen bond interactions between the D49 and galactosylated oligosaccharides play an important role in enzyme-XGO interactions. This was confirmed by site-directed mutagenesis, where the D49A mutant affected catalytic efficiency against galactosylated XGOs. Our findings advance xyloglucan disassembly models and highlight the importance of YicI for biotechnology applications.

Covalent Immobilization of Chondrostereum purpureum Endopolygalacturonase on Ferromagnetic Nanoparticles: Catalytic Properties and Biotechnological Application.

Pectinases are widely used in a variety of industrial processes. However, their application is limited by low catalytic processivity, reduced stability, high cost, and poor re-use compatibility. These drawbacks may be overcome by enzyme immobilization with ferromagnetic nanoparticles, which are easily recovered by a magnetic field. In this work, an endopolygalacturonase from Chondrostereum purpureum (EndoPGCp) expressed in Pichia pastoris was immobilized on glutaraldehyde-activated chitosan ferromagnetic nanoparticles (EndoPGCp-MNP) and used to supplement a commercial enzyme cocktail. No significant differences in biochemical and kinetic properties were observed between EndoPGCp-MNP and EndoPGCp, although the EndoPGCp-MNP showed slightly increased thermostability. Cocktail supplementation with EndoPGCp-MNP increased reducing sugar release from orange wastes by 1.8-fold and showed a synergistic effect as compared to the free enzyme. Furthermore, EndoPGCp-MNP retained 65% of the initial activity after 7 cycles of re-use. These properties suggest that EndoPGCp-MNP may find applications in the processing of pectin-rich agroindustrial residues.

Enhanced hydrolytic efficiency of an engineered CBM11-glucanase enzyme chimera against barley ß-d-glucan extracts.

The ß-d-glucans are abundant cell wall polysaccharides in many cereals and contain both (1,3)- and (1,4)-bonds. The ß-1,3-1,4-glucanases (EC 3.2.1.73) hydrolyze ß-(1,4)-d-glucosidic linkages in glucans, and have applications in both animal and human food industries. A chimera between the family 11 carbohydrate-binding module from Ruminoclostridium (Clostridium)thermocellumcelH (RtCBM11), with the ß-1,3-1,4-glucanase from Bacillus subtilis (BglS) was constructed by end-to-end fusion (RtCBM11-BglS) to evaluate the effects on the catalytic function and its application in barley ß-glucan degradation for the brewing industry. The parental and chimeric BglS presented the same optimum pH (6.0) and temperature (50 °C) for maximum activity. The RtCBM11-BglS showed increased thermal stability and 30% higher hydrolytic efficiency against purified barley ß-glucan, and the rate of hydrolysis of ß-1,3-1,4-glucan in crude barley extracts was significantly increased. The enhanced catalytic performance of the RtCBM11-BglS may be useful for the treatment of crude barley extracts in the brewing industry.

A Highly Glucose Tolerant ß-Glucosidase from Malbranchea pulchella (MpBg3) Enables Cellulose Saccharification.

ß-glucosidases catalyze the hydrolysis ß-1,4, ß-1,3 and ß-1,6 glucosidic linkages from non-reducing end of short chain oligosaccharides, alkyl and aryl ß-D-glucosides and disaccharides. They catalyze the rate-limiting reaction in the conversion of cellobiose to glucose in the saccharification of cellulose for second-generation ethanol production, and due to this important role the search for glucose tolerant enzymes is of biochemical and biotechnological importance. In this study we characterize a family 3 glycosyl hydrolase (GH3) ß-glucosidase (Bgl) produced by Malbranchea pulchella (MpBgl3) grown on cellobiose as the sole carbon source. Kinetic characterization revealed that the MpBgl3 was highly tolerant to glucose, which is in contrast to many Bgls that are completely inhibited by glucose. A 3D model of MpBgl3 was generated by molecular modeling and used for the evaluation of structural differences with a Bgl3 that is inhibited by glucose. Taken together, our results provide new clues to understand the glucose tolerance in GH3 ß-glucosidases.

A Halotolerant Endo-1,4-ß-Xylanase from Aspergillus clavatus with Potential Application for Agroindustrial Residues Saccharification.

The use of non-potable water (such as seawater) is an attractive alternative for water intensive processes such as biomass pretreatment and saccharification steps in the production of biochemicals and biofuels. Identification and application of halotolerant enzymes compatible with high-salt conditions may reduce the energy needed for non-potable water treatment and decrease waste treatment costs. Here we present the biochemical properties of a halotolerant endo-1,4-ß-xylanase produced by Aspergillus clavatus in submerged fermentation, using paper sludge (XPS) and sugarcane bagasse (XSCB), and its potential application in the hydrolysis of agroindustrial residues. The peptide mass fingerprint and amino acid sequencing of the XPS and XSCB enzymes showed primary structure similarities with an endo-1,4-ß-xylanase from Aspergillus clavatus (XYNA_ASPCL). Both enzyme preparations presented good thermal stability at 50 °C and were stable over a wide range of pH and Vmax up to 2450 U/mg for XPS. XPS and XSCB were almost fully stable even after 24 h of incubation in the presence of up to 3 M NaCl, and their activity were not affected by 500 mM NaCl. Both enzyme preparations were capable of hydrolyzing paper sludge and sugarcane bagasse to release reducing sugars. These characteristics make this xylanase attractive to be used in the hydrolysis of biomass, particularly with brackish water or seawater.

A novel Trichoderma reesei mutant RP698 with enhanced cellulase production.

A new strain of Trichoderma reesei (teleomorph Hypocrea jecorina) with high cellulase production was obtained by exposing the spores from T. reesei QM9414 to an ultraviolet light followed by selecting fast-growing colonies on plates containing CMC (1% w/v) as the carbon source. The mutant T. reesei RP698 reduced cultivation period to 5 days and increased tolerance to the end-products of enzymatic cellulose digestion. Under submerged fermentation conditions, FPase, CMCase, and Avicelase production increased up to 2-fold as compared to the original QM9414 strain. The highest levels of cellulase activity were obtained at 27 °C after 72 h with Avicel®, cellobiose, and sugarcane bagasse as carbon sources. The temperature and pH activity optima of the FPase, CMCase, and Avicelase were approximately 60 °C and 5.0, respectively. The cellulase activity was unaffected by the addition of 140 mM glucose in the enzyme assay. When T. reesei RP698 crude extract was supplemented by the addition of ß-glucosidase from Scytalidium thermophilum, a 2.3-fold increase in glucose release was observed, confirming the low inhibition by the end-product of cellulose hydrolysis. These features indicate the utility of this mutant strain in the production of enzymatic cocktails for biomass degradation.

Biochemical and kinetic characterization of the recombinant GH28 Stereum purpureum endopolygalacturonase and its biotechnological application.

Endopolygalacturonase (EndoPG) from Stereum purpureum was expressed as a soluble protein in Pichia pastoris GS115, where after 3 days methanol induction the enzyme activity in the culture supernatant was 40 U mL-1. After purification by IMAC, SDS-PAGE analysis showed that the molecular weight of EndoPG was approximately 60.0 kDa. The carbohydrate content of the recombinant enzyme was estimated to be 67.0% (w/w). The optimum temperature and pH of catalysis were 60-70 °C and pH of 4.5, respectively. The enzyme was highly stable over the pH range 6.0-8.0 and retained approximately 60% of its initial activity after incubation at 70 °C for 30 min. The enzyme showed a specific activity of 5040.0 ±â€¯217 U mg-1 and hydrolyzed citrus pectin with Vmax and a KM of 4947.10 ±â€¯393.63 U mg-1 and 2.45 ±â€¯0.23 mg mL-1, respectively, and showed a catalytic efficiency of 2052.90 ±â€¯193.54 mL mg-1 s-1. EndoPG alone reduced the viscosity of papaya juice by 20% after 30 min, and increased its transmittance about 50% with a concomitant reduction of the color by about 55% after 5 h of enzymatic treatment. For apple juice, the relative reduction of viscosity was 30% after 5 h, and the reduction of the color was 30% with a 12% increase in transmittance. Supplementation of a commercial enzymatic cocktail for lignocellulose saccharification with EndoPG increased total reducing sugar release by 8.6 ±â€¯2.1% against sugar cane bagasse, indicating improved access of the cellulolytic enzymes to the biomass polysaccharides.

Immobilization of a ß-glucosidase and an endoglucanase in ferromagnetic nanoparticles: A study of synergistic effects.

Nanoparticles can act as support materials for enzymatic immobilization, introducing a balance of characteristics that modulate the efficiency of biocatalysts, such as specific surface area, resistance to mass transfer and effective enzymatic loading. Magnetic nanoparticles can be easily separated using an external magnetic field, and in this work two recombinant enzymes, the ß-glucosidase from Humicola insolens (Bglhi) and the endoglucanase from Scytalidium thermophilum (Egst) were immobilized on synthetized Fe3O4 nanoparticles derivatized with chitosan/glutaraldehyde/N-(5-amino-1-carboxy-pentyl) iminodiacetic acid and functionalized with NiCl2. The immobilization yields were about 20% for Bglhi and Egst with efficiencies of 132% and 115%, respectively. The two enzymes were also co-immobilized with yield was about 49%. The optimal temperatures of the immobilized enzymes were 70 °C and 55 °C for Egst and Bglhi, respectively. Egst hydrolyzed CMC in the presence of 4 mM MnCl2 with Vmax = 625.0 ±â€¯6.7 U mg-1 and KM = 6.4 ±â€¯0.5 mg mL-1 resulting in a catalytic efficiency (kcat/KM) of 107.4 ±â€¯5.4 mg-1 s-1 mL. Bglhi hydrolyzed pNP-Glc with Vmax = 52.7 ±â€¯2.7 U mg-1 and KM = 0.23 ±â€¯0.01 mM resulting in a catalytic efficiency (kcat/KM) of 214.3 ±â€¯10.2 s-1 mM-1. The individually immobilized enzymes when combined showed a synergistic effect on the substrates tested and a very similar action when compared to the co-immobilized enzymes, suggesting excellent potential for application in biotechnological processes.

Glucose tolerant and glucose stimulated ß-glucosidases - A review.

The ß-glucosidases (ß-D-glucoside glucohydrolase, EC 3.2.1.21) hydrolyze glycosidic bonds of alkyl-, amino-, or aryl-ß-D-glucosides, cyanogenic glucosides, disaccharides and short oligosaccharides and can also catalyze the synthesis of glycosyl-bonds between different molecules via transglycosylation. Due to their ubiquitous phylogenetic distribution, substrate diversity and ability to both hydrolyze and synthesize glycosidic bonds, the catalysis and regulation of ß-glucosidases have been extensively studied. Many ß-glucosidases are inhibited by the reaction product glucose, and reduced catalytic activity may limit the biotechnological and industrial applications of these enzymes and this has stimulated the search for ß-glucosidases that maintain their activity at high glucose concentrations. Studies of many glucose tolerant enzymes have been reported and due to the ongoing interest in these enzymes, here it has been reviewed this accumulated body of knowledge which provides valuable insights as to the kinetics, structure, regulation and evolution of glucose tolerant and glucose stimulated ß-glucosidases.

Overexpression of a Cellobiose-Glucose-Halotolerant Endoglucanase from Scytalidium thermophilum.

Enzyme reaction products and by-products from pretreatment steps can inhibit endoglucanases and are major factors limiting the efficiency of enzymatic lignocellulosic biomass hydrolysis. The gene encoding the endoglucanase from Scytalidium thermophilum (egst) was cloned and expressed as a soluble protein in Pichia pastoris GS115. The recombinant enzyme (Egst) was monomeric (66 kDa) and showed an estimated carbohydrate content of 53.3% (w/w). The optimum temperature and pH of catalysis were 60-70 °C and pH of 5.5, respectively. The enzyme was highly stable at pH 3.0-8.0 with a half-life in water of 100 min at 65 °C. The Egst presented good halotolerance, retaining 84.1 and 71.4% of the control activity in the presence of 0.5 and 2.0 mol L-1 NaCl, respectively. Hydrolysis of medium viscosity carboxymethylcellulose (CMC) by Egst was stimulated 1.77-, 1.84-, 1.64-, and 1.8-fold by dithiothreitol, ß-mercaptoethanol, cysteine, and manganese at 10, 10, 10, and 5 mmol L-1 concentration, respectively. The enzyme hydrolyzed CMC with maximal velocity and an apparent affinity constant of 432.10 ± 16.76 and 10.5 ± 2.53 mg mL-1, respectively. Furthermore, the Egst was tolerant to reaction products and able to act on pretreated fractions sugarcane bagasse demonstrating excellent properties for application in the hydrolysis of lignocellulosic biomass.

Engineering the GH1 ß-glucosidase from Humicola insolens: Insights on the stimulation of activity by glucose and xylose.

The activity of the GH1 ß-glucosidase from Humicola insolens (Bglhi) against p-nitrophenyl-ß-D-glucopyranoside (pNP-Glc) and cellobiose is enhanced 2-fold by glucose and/or xylose. Kinetic and transglycosylation data showed that hydrolysis is preferred in the absence of monosaccharides. Stimulation involves allosteric interactions, increased transglycosylation and competition of the substrate and monosaccharides for the -1 glycone and the +1/+2 aglycone binding sites. Protein directed evolution has been used to generate 6 mutants of Bglhi with altered stimulation patterns. All mutants contain one of three substitutions (N235S, D237V or H307Y) clustered around the +1/+2 aglycone binding sites. Two mutants with the H307Y substitution preferentially followed the transglycosylation route in the absence of xylose or glucose. The strong stimulation of their pNP-glucosidase and cellobiase activities was accompanied by increased transglycosylation and higher monosaccharide tolerance. The D237V mutation favoured hydrolysis over transglycosylation and the pNP-glucosidase activity, but not the cellobiase activity, was stimulated by xylose. The substitution N235S abolished the preference for hydrolysis or transglycosylation; the cellobiase, but not the pNP-glucosidase activity of the mutants was strongly inhibited by xylose. Both the D237V and N235S mutations lowered tolerance to the monosaccharides. These results provide evidence that the fine modulation of the activity of Bglhi and mutants by glucose and/or xylose is regulated by the relative affinities of the glycone and aglycone binding sites for the substrate and the free monosaccharides.

Structural determinants of the hyperalgesic activity of myotoxic Lys49-phospholipase A2.

BACKGROUND: Bothropstoxin-I (BthTx-I) is a Lys49-phospholipase A2 (Lys49-PLA2) from the venom of Bothrops jararacussu, which despite of the lack of catalytic activity induces myotoxicity, inflammation and pain. The C-terminal region of the Lys49-PLA2s is important for these effects; however, the amino acid residues that determine hyperalgesia and edema are unknown. The aim of this study was to characterize the structural determinants for the Lys49-PLA2-induced nociception and inflammation. METHODS: Scanning alanine mutagenesis in the active-site and C-terminal regions of BthTx-I has been used to study the structural determinants of toxin activities. The R118A mutant was employed as this substitution decreases PLA2 myotoxicity. In addition, K115A and K116A mutants - which contribute to decrease cytotoxicity - and the K122A mutant - which decreases both myotoxicity and cytotoxicity - were also used. The H48Q mutant - which does not interfere with membrane damage or myotoxic activity - was used to evaluate if the PLA2 catalytic site is relevant for the non-catalytic PLA2-induced pain and inflammation. Wistar male rats received intraplantar injections with mutant PLA2. Subsequently, hyperalgesia and edema were evaluated by the paw pressure test and by a plethysmometer. Native and recombinant BthTx-I were used as controls. RESULTS: Native and recombinant BthTx-I induced hyperalgesia and edema, which peaked at 2 h. The R118A mutant did not induce nociception or edema. The mutations K115A and K116A abolished hyperalgesia without interfering with edema. Finally, the K122A mutant did not induce hyperalgesia and presented a decreased inflammatory response. CONCLUSIONS: The results obtained with the BthTx-I mutants suggest, for the first time, that there are distinct residues responsible for the hyperalgesia and edema induced by BthTx-I. In addition, we also showed that cytolytic activity is essential for the hyperalgesic effect but not for edematogenic activity, corroborating previous data showing that edema and hyperalgesia can occur in a non-dependent manner. Understanding the structure-activity relationship in BthTx-I has opened new possibilities to discover the target for PLA2-induced pain.

The role of local residue environmental changes in thermostable mutants of the GH11 xylanase from Bacillus subtilis.

A thermostable variant of the mesophilic xylanase A from Bacillus subtilis (BsXynA-G3_4x) contains the four mutations Gln7His, Gly13Arg, Ser22Pro, and Ser179Cys. The crystal structure of the BsXynA-G3_4x has been solved, and the local environments around each of these positions investigated by molecular dynamics (MD) simulations at 328K and 348K. The structural and MD simulation results were correlated with thermodynamic data of the wild-type enzyme, the 4 single mutants and the BsXynA-G3_4x. This analysis suggests that the overall stabilizing effect is entropic, and is consistent with solvation of charged residues and reduction of main-chain flexibility. Furthermore, increased protein-protein hydrogen bonding and hydrophobic interactions also contribute to stabilize the BsXynA-G3_4x. The study revealed that a combination of several factors is responsible for increased thermostability of the BsXynA-G3_4x; (i) introduction of backbone rigidity in regions of high flexibility, (ii) solvation effects and (iii) hydrophobic contacts.

Structural determinants of the hyperalgesic activity of myotoxic Lys49-phospholipase A2

Background: Bothropstoxin-I (BthTx-I) is a Lys49-phospholipase A(2) (Lys49-PLA(2)) from the venom of Bothrops jararacussu, which despite of the lack of catalytic activity induces myotoxicity, inflammation and pain. The C-terminal region of the Lys49-PLA(2)s is important for these effects; however, the amino acid residues that determine hyperalgesia and edema are unknown. The aim of this study was to characterize the structural determinants for the Lys49-PLA(2)-induced nociception and inflammation. Methods: Scanning alanine mutagenesis in the active-site and C-terminal regions of BthTx-I has been used to study the structural determinants of toxin activities. The R118A mutant was employed as this substitution decreases PLA(2) myotoxicity. In addition, K115A and K116A mutants which contribute to decrease cytotoxicity - and the K122A mutant which decreases both myotoxicity and cytotoxicity - were also used. The H48Q mutant - which does not interfere with membrane damage or myotoxic activity - was used to evaluate if the PLA(2) catalytic site is relevant for the non-catalytic PLA(2)-induced pain and inflammation. Wistar male rats received intraplantar injections with mutant PLA(2). Subsequently, hyperalgesia and edema were evaluated by the paw pressure test and by a plethysmometer. Native and recombinant BthTx-I were used as controls. Results: Native and recombinant BthTx-I induced hyperalgesia and edema, which peaked at 2 h. The R118A mutant did not induce nociception or edema. The mutations K115A and K116A abolished hyperalgesia without interfering with edema. Finally, the K122A mutant did not induce hyperalgesia and presented a decreased inflammatory response. Conclusions: The results obtained with the BthTx-I mutants suggest, for the first time, that there are distinct residues responsible for the hyperalgesia and edema induced by BthTx-I. In addition, we also showed that cytolytic activity is essential for the hyperalgesic effect but not for edematogenic activity, corroborating previous data showing that edema and hyperalgesia can occur in a non-dependent manner. Understanding the structure-activity relationship in BthTx-I has opened new possibilities to discover the target for PLA(2)-induced pain.